New audio bit #46

povik · 2022-08-22T14:37:13Z

Sound driver update!

DTs to go with it: https://github.com/povik/linux/tree/bits-update/000-devicetree
(fixups on top of current bits/000-devicetree, you will need to squash 'arm64: dts: apple: t8103-j313: Also disable speakers' to cleanly take up the fixups)

Changes

The ALSA card now has devices Primary/hw:0,0 and Secondary/hw:0,1. Routing of audio from the devices to speakers/headphones depends on the state of the card's controls (those seen in alsamixer). By default both headphones/speakers are routed to the primary device, with one or the other being enabled based on the plug state of the jack connector. You can override that. To drive all the speakers on large (>2ch) speaker arrays, you need to use the secondary device. So you set the Speaker Playback Mux to Secondary, then stream audio to hw:0,1. This is because the primary device has some parameters set to appease the jack codec -- this limitation may be lifted in the future.

Anyway, such details should be hidden in proper userspace configuration, which we have yet to write.

Speakers

The machine driver now sets volume caps and locks some other controls. This is done in a fixup_controls method specific to each machine model. I have written those for j274 (Mac mini) and j314/316 (2021 Macbook Pros), but for the other models it is missing. The driver refuses probe if all: 1. the method is missing for the model in question, 2. speakers are enabled in DT, and 3. snd-soc-macaudio.void_warranty=1 isn't passed to the kernel.

You can help write the methods by obtaining a trace of macOS booting and doing playback on the speakers with the hv/trace_codecs.py script. This is really just to see what volume level macOS sets. (Ideally you take the trace with setting the full user volume in macOS, although it appears macOS doesn't propagate the user volume into codecs to any extent.)

J314

We now set the OCE_RETRY bit on TAS2764 speaker amps so that they retry unmute after an overcurrent event. This is to counter the dropouts of old. The other workaround didn't prove solid.
The 'DC blocker' highpass filter of the speaker amps is now exported to userspace for the woofers and locked at 800 Hz for the tweeters.

CS42L84 driver NEW!

With the CS42L84 driver we should now have jack support everywhere (hooray!), that is pending the DTs are correct. The driver was tested on j314. It is able of both playback and capture. The mic detection is hand-rolled by me, it is at the moment limited to CTIA (non-China) wiring of the jack, and it is plausible there are issues with it.

Other changes (that I can think of right now)

Machine driver name (important for userspace to lock on) is now snd-soc-macaudio
J314/J316 now have distinct model strings on the ALSA card
The jack codec now has 'Jack' prefix on controls on all machines (was not uniform before). This will upset some people's volume settings.

povik · 2022-08-23T09:58:52Z

Wrote fixup_controls for mac studio and pushed additional DT fixups (added jack node on mac studio, fixed M2 devices)

When user tries to create a DAMON context via the DAMON debugfs interface with a name of an already existing context, the context directory creation fails but a new context is created and added in the internal data structure, due to absence of the directory creation success check. As a result, memory could leak and DAMON cannot be turned on. An example test case is as below: # cd /sys/kernel/debug/damon/ # echo "off" > monitor_on # echo paddr > target_ids # echo "abc" > mk_context # echo "abc" > mk_context # echo $$ > abc/target_ids # echo "on" > monitor_on <<< fails Return value of 'debugfs_create_dir()' is expected to be ignored in general, but this is an exceptional case as DAMON feature is depending on the debugfs functionality and it has the potential duplicate name issue. This commit therefore fixes the issue by checking the directory creation failure and immediately return the error in the case. Link: https://lkml.kernel.org/r/20220821180853.2400-1-sj@kernel.org Fixes: 75c1c2b ("mm/damon/dbgfs: support multiple contexts") Signed-off-by: Badari Pulavarty <badari.pulavarty@intel.com> Signed-off-by: SeongJae Park <sj@kernel.org> Cc: <stable@vger.kernel.org> [ 5.15.x] Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

The decompressors may be called while in an atomic section. So move the kmalloc() out of this path, and into the "page actor" init function. This fixes a regression introduced by commit f268eed ("squashfs: extend "page actor" to handle missing pages") Link: https://lkml.kernel.org/r/20220822215430.15933-1-phillip@squashfs.org.uk Fixes: f268eed ("squashfs: extend "page actor" to handle missing pages") Reported-by: Chris Murphy <lists@colorremedies.com> Signed-off-by: Phillip Lougher <phillip@squashfs.org.uk> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Yu Zhao reported a bug after the commit "mm/swap: Add swp_offset_pfn() to fetch PFN from swap entry" added a check in swp_offset_pfn() for swap type [1]: kernel BUG at include/linux/swapops.h:117! CPU: 46 PID: 5245 Comm: EventManager_De Tainted: G S O L 6.0.0-dbg-DEV #2 RIP: 0010:pfn_swap_entry_to_page+0x72/0xf0 Code: c6 48 8b 36 48 83 fe ff 74 53 48 01 d1 48 83 c1 08 48 8b 09 f6 c1 01 75 7b 66 90 48 89 c1 48 8b 09 f6 c1 01 74 74 5d c3 eb 9e <0f> 0b 48 ba ff ff ff ff 03 00 00 00 eb ae a9 ff 0f 00 00 75 13 48 RSP: 0018:ffffa59e73fabb80 EFLAGS: 00010282 RAX: 00000000ffffffe8 RBX: 0c00000000000000 RCX: ffffcd5440000000 RDX: 1ffffffffff7a80a RSI: 0000000000000000 RDI: 0c0000000000042b RBP: ffffa59e73fabb80 R08: ffff9965ca6e8bb8 R09: 0000000000000000 R10: ffffffffa5a2f62d R11: 0000030b372e9fff R12: ffff997b79db5738 R13: 000000000000042b R14: 0c0000000000042b R15: 1ffffffffff7a80a FS: 00007f549d1bb700(0000) GS:ffff99d3cf680000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000440d035b3180 CR3: 0000002243176004 CR4: 00000000003706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> change_pte_range+0x36e/0x880 change_p4d_range+0x2e8/0x670 change_protection_range+0x14e/0x2c0 mprotect_fixup+0x1ee/0x330 do_mprotect_pkey+0x34c/0x440 __x64_sys_mprotect+0x1d/0x30 It triggers because pfn_swap_entry_to_page() could be called upon e.g. a genuine swap entry. Fix it by only calling it when it's a write migration entry where the page* is used. [1] https://lore.kernel.org/lkml/CAOUHufaVC2Za-p8m0aiHw6YkheDcrO-C3wRGixwDS32VTS+k1w@mail.gmail.com/ Link: https://lkml.kernel.org/r/20220823221138.45602-1-peterx@redhat.com Fixes: 6c28760 ("mm: remember exclusively mapped anonymous pages with PG_anon_exclusive") Signed-off-by: Peter Xu <peterx@redhat.com> Reported-by: Yu Zhao <yuzhao@google.com> Tested-by: Yu Zhao <yuzhao@google.com> Reviewed-by: David Hildenbrand <david@redhat.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

My Bootlin address is preferred from now on. Link: https://lkml.kernel.org/r/20220826130515.3011951-1-luca.ceresoli@bootlin.com Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Atish Patra <atishp@atishpatra.org> Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl> Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Pull bitmap fixes from Yury Norov: "Fix the reported issues, and implements the suggested improvements, for the version of the cpumask tests [1] that was merged with commit c41e886 ("lib/test: introduce cpumask KUnit test suite"). These changes include fixes for the tests, and better alignment with the KUnit style guidelines" * tag 'bitmap-6.0-rc3' of github.com:/norov/linux: lib/cpumask_kunit: add tests file to MAINTAINERS lib/cpumask_kunit: log mask contents lib/test_cpumask: follow KUnit style guidelines lib/test_cpumask: fix cpu_possible_mask last test lib/test_cpumask: drop cpu_possible_mask full test

…/scm/linux/kernel/git/akpm/mm Pull more hotfixes from Andrew Morton: "Seventeen hotfixes. Mostly memory management things. Ten patches are cc:stable, addressing pre-6.0 issues" * tag 'mm-hotfixes-stable-2022-08-28' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: .mailmap: update Luca Ceresoli's e-mail address mm/mprotect: only reference swap pfn page if type match squashfs: don't call kmalloc in decompressors mm/damon/dbgfs: avoid duplicate context directory creation mailmap: update email address for Colin King asm-generic: sections: refactor memory_intersects bootmem: remove the vmemmap pages from kmemleak in put_page_bootmem ocfs2: fix freeing uninitialized resource on ocfs2_dlm_shutdown Revert "memcg: cleanup racy sum avoidance code" mm/zsmalloc: do not attempt to free IS_ERR handle binder_alloc: add missing mmap_lock calls when using the VMA mm: re-allow pinning of zero pfns (again) vmcoreinfo: add kallsyms_num_syms symbol mailmap: update Guilherme G. Piccoli's email addresses writeback: avoid use-after-free after removing device shmem: update folio if shmem_replace_page() updates the page mm/hugetlb: avoid corrupting page->mapping in hugetlb_mcopy_atomic_pte

Move the flush out of smb2_copychunk_range() into its callers. This will allow the pagecache to be invalidated between the flush and the operation in smb3_collapse_range() and smb3_insert_range(). Signed-off-by: David Howells <dhowells@redhat.com> cc: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com>

collapse range doesn't discard the affected cached region so can risk temporarily corrupting the file data. This fixes xfstest generic/031 I also decided to merge a minor cleanup to this into the same patch (avoiding rereading inode size repeatedly unnecessarily) to make it clearer. Cc: stable@vger.kernel.org Fixes: 5476b5d ("cifs: add support for FALLOC_FL_COLLAPSE_RANGE") Reported-by: David Howells <dhowells@redhat.com> Tested-by: David Howells <dhowells@redhat.com> Reviewed-by: David Howells <dhowells@redhat.com> cc: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com>

insert range doesn't discard the affected cached region so can risk temporarily corrupting file data. Also includes some minor cleanup (avoiding rereading inode size repeatedly unnecessarily) to make it clearer. Cc: stable@vger.kernel.org Fixes: 7fe6fe9 ("cifs: add FALLOC_FL_INSERT_RANGE support") Signed-off-by: David Howells <dhowells@redhat.com> cc: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com>

Upon reception, a packet must be categorized, either it's destination is the host, or it is another host. A packet with no destination addressing fields may be valid in two situations: - the packet has no source field: only ACKs are built like that, we consider the host as the destination. - the packet has a valid source field: it is directed to the PAN coordinator, as for know we don't have this information we consider we are not the PAN coordinator. There was likely a copy/paste error made during a previous cleanup because the if clause is now containing exactly the same condition as in the switch case, which can never be true. In the past the destination address was used in the switch and the source address was used in the if, which matches what the spec says. Cc: stable@vger.kernel.org Fixes: ae531b9 ("ieee802154: use ieee802154_addr instead of *_sa variants") Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/r/20220826142954.254853-1-miquel.raynal@bootlin.com Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>

The rc code is 0 at the error path "status & CC2520_STATUS_TX_UNDERFLOW". Assign rc code with '-EINVAL' at this error path to fix it. Signed-off-by: Li Qiong <liqiong@nfschina.com> Link: https://lore.kernel.org/r/20220829071259.18330-1-liqiong@nfschina.com Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>

We have a cross dependency between KVM and VFIO when using s390 vfio_pci_zdev extensions for PCI passthrough To be able to keep both subsystem modular we add a registering hook inside the S390 core code. This fixes a build problem when VFIO is built-in and KVM is built as a module. Reported-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kernel test robot <lkp@intel.com> Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Reviewed-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Pierre Morel <pmorel@linux.ibm.com> Fixes: 09340b2 ("KVM: s390: pci: add routines to start/stop interpretive execution") Cc: <stable@vger.kernel.org> Acked-by: Janosch Frank <frankja@linux.ibm.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested Link: https://lore.kernel.org/r/20220819122945.9309-1-pmorel@linux.ibm.com Message-Id: <20220819122945.9309-1-pmorel@linux.ibm.com> Signed-off-by: Janosch Frank <frankja@linux.ibm.com>

Add support for OPPO R11 USB diag serial port to option driver. This phone uses Qualcomm Snapdragon 660 SoC. usb-devices output: T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 10 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=22d9 ProdID=276c Rev=04.04 S: Manufacturer=OPPO S: Product=SDM660-MTP _SN:09C6BCA7 S: SerialNumber=beb2c403 C: #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option I: If#=0x1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs Signed-off-by: Yan Xinyu <sdlyyxy@bupt.edu.cn> Link: https://lore.kernel.org/r/20220714102037.4113889-1-sdlyyxy@bupt.edu.cn Link: https://lore.kernel.org/r/Yt1WfSZk03Plpnan@hovoldconsulting.com Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>

xrs700x_read_port_counters() updates the stats from a worker using the u64_stats_update_begin() version. This is okay on 32-UP since on the reader side preemption is disabled. On 32bit-SMP the writer can be preempted by the reader at which point the reader will spin on the seqcount until writer continues and completes the update. Assigning the mib_mutex mutex to the underlying seqcount would ensure proper synchronisation. The API for that on the u64_stats_init() side isn't available. Since it is the only user, just use disable interrupts during the update. Use u64_stats_update_begin_irqsave() on the writer side to ensure an uninterrupted update. Fixes: ee00b24 ("net: dsa: add Arrow SpeedChips XRS700x driver") Cc: Andrew Lunn <andrew@lunn.ch> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: George McCollister <george.mccollister@gmail.com> Cc: Vivien Didelot <vivien.didelot@gmail.com> Cc: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: George McCollister <george.mccollister@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>

On 32bit-UP u64_stats_fetch_begin() disables only preemption. If the reader is in preemptible context and the writer side (u64_stats_update_begin*()) runs in an interrupt context (IRQ or softirq) then the writer can update the stats during the read operation. This update remains undetected. Use u64_stats_fetch_begin_irq() to ensure the stats fetch on 32bit-UP are not interrupted by a writer. 32bit-SMP remains unaffected by this change. Cc: "David S. Miller" <davem@davemloft.net> Cc: Catherine Sullivan <csully@google.com> Cc: David Awogbemila <awogbemila@google.com> Cc: Dimitris Michailidis <dmichail@fungible.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Hans Ulli Kroll <ulli.kroll@googlemail.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Jeroen de Borst <jeroendb@google.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: Simon Horman <simon.horman@corigine.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Cc: oss-drivers@corigine.com Cc: stable@vger.kernel.org Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>

Sebastian Andrzej Siewior says: ==================== net: u64_stats fixups for 32bit. while looking at the u64-stats patch https://lore.kernel.org/all/20220817162703.728679-10-bigeasy@linutronix.de I noticed that u64_stats_fetch_begin() is used. That suspicious thing about it is that network processing, including stats update, is performed in NAPI and so I would expect to see u64_stats_fetch_begin_irq() in order to avoid updates from NAPI during the read. This is only needed on 32bit-UP where the seqcount is not used. This is address in 2/2. The remaining user take some kind of precaution and may use u64_stats_fetch_begin(). I updated the previously mentioned patch to get rid of u64_stats_fetch_begin_irq(). If this is not considered stable patch worthy then it can be ignored and considred fixed by the other series which removes the special 32bit cases. The xrs700x driver reads and writes the counter from preemptible context so the only missing piece here is at least disable preemption on the writer side to avoid preemption while the writer is in progress. The possible reader would spin then until the writer completes its write critical section which is considered bad. This is addressed in 1/2 by using u64_stats_update_begin_irqsave() and so disable interrupts during the write critical section. The other closet resemblance I found is mdio_bus.c::mdiobus_stats_acct() where preemtion is disabled unconditionally. This is something I want to avoid since it also affects 64bit. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>

Add usb product id entry for the Quectel EM060K module. "MBIM mode": DIAG + NMEA + AT + MODEM + MBIM + QDSS T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 8 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=030b Rev= 5.04 S: Manufacturer=Quectel S: Product=EM060K-GL S: SerialNumber=89fb57db C:* #Ifs= 7 Cfg#= 1 Atr=a0 MxPwr=500mA A: FirstIf#= 8 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00 I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 8 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=88(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 9 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I:* If#= 9 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#=12 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=70 Driver=(none) E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Yonglin Tan <yonglin.tan@outlook.com> [ johan: mention QDSS port and sort entries ] Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>

works perfectly with: modprobe ftdi_sio echo "0590 00b2" | tee /sys/module/ftdi_sio/drivers/usb-serial\:ftdi_sio/new_id > /dev/null but doing this every reboot is a pain in the ass. Signed-off-by: Niek Nooijens <niek.nooijens@omron.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>

We added PIDs for MV32-WA/WB MBIM mode before, now we need to add support for RmNet mode. Test evidence as below: T: Bus=03 Lev=01 Prnt=01 Port=02 Cnt=03 Dev#= 3 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=1e2d ProdID=00f3 Rev=05.04 S: Manufacturer=Cinterion S: Product=Cinterion PID 0x00F3 USB Mobile Broadband S: SerialNumber=d7b4be8d C: #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan I: If#=0x1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option I: If#=0x3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option T: Bus=03 Lev=01 Prnt=01 Port=02 Cnt=03 Dev#= 10 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=1e2d ProdID=00f4 Rev=05.04 S: Manufacturer=Cinterion S: Product=Cinterion PID 0x00F4 USB Mobile Broadband S: SerialNumber=d095087d C: #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan I: If#=0x1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option I: If#=0x3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option Signed-off-by: Slark Xiao <slark_xiao@163.com> [ johan: sort entries ] Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>

…into drm-intel-fixes gvt-fixes-2022-08-22 - CometLake regression fix in mmio table rework (Alex) - misc kernel doc and typo fixes Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> From: Zhenyu Wang <zhenyuw@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220822031215.GJ1089@zhen-hp.sh.intel.com

Crucible + recent Mesa seems to sometimes hit: GEM_BUG_ON(num_ccs_blks > NUM_CCS_BLKS_PER_XFER) And it looks like we can also trigger this with gem_lmem_swapping, if we modify the test to use slightly larger object sizes. Looking closer it looks like we have the following issues in migrate_copy(): - We are using plain integer in various places, which we can easily overflow with a large object. - We pass the entire object size (when the src is lmem) into emit_pte() and then try to copy it, which doesn't work, since we only have a few fixed sized windows in which to map the pages and perform the copy. With an object > 8M we therefore aren't properly copying the pages. And then with an object > 64M we trigger the GEM_BUG_ON(num_ccs_blks > NUM_CCS_BLKS_PER_XFER). So it looks like our copy handling for any object > 8M (which is our CHUNK_SZ) is currently broken on DG2. Fixes: da0595a ("drm/i915/migrate: Evict and restore the flatccs capable lmem obj") Testcase: igt@gem_lmem_swapping Signed-off-by: Matthew Auld <matthew.auld@intel.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Ramalingam C <ramalingam.c@intel.com> Reviewed-by: Ramalingam C<ramalingam.c@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220805132240.442747-2-matthew.auld@intel.com (cherry picked from commit 8676145) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

If the GuC CTs are full and we need to stall the request submission while waiting for space, we save the stalled request and where the stall occurred; when the CTs have space again we pick up the request submission from where we left off. If a full GT reset occurs, the state of all contexts is cleared and all non-guilty requests are unsubmitted, therefore we need to restart the stalled request submission from scratch. To make sure that we do so, clear the saved request after a reset. Fixes note: the patch that introduced the bug is in 5.15, but no officially supported platform had GuC submission enabled by default in that kernel, so the backport to that particular version (and only that one) can potentially be skipped. Fixes: 925dc1c ("drm/i915/guc: Implement GuC submission tasklet") Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Cc: John Harrison <john.c.harrison@intel.com> Cc: <stable@vger.kernel.org> # v5.15+ Reviewed-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220811210812.3239621-1-daniele.ceraolospurio@intel.com (cherry picked from commit f922fbb) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Avoid using ports that aren't initialized in case the VBT backlight or CABC ports have invalid values. This fixes a NULL pointer dereference of intel_dsi->dsi_hosts[port] in such cases. Cc: stable@vger.kernel.org Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/b0f4f087866257d280eb97d6bcfcefd109cc5fa2.1660664162.git.jani.nikula@intel.com (cherry picked from commit f4a6c7a) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

The VBT dual-link DSI backlight and CABC still use ports A and C, both in Bspec and code, while display 11+ DSI only supports ports A and B. Assume port C actually means port B for display 11+ when parsing VBT. Bspec: 20154 Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/6476 Cc: stable@vger.kernel.org Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/8c462718bcc7b36a83e09d0a5eef058b6bc8b1a2.1660664162.git.jani.nikula@intel.com (cherry picked from commit ab55165) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Commit 20f85ef ("drm/i915/backlight: use unique backlight device names") added support for multiple backlight devices on dual panel systems, but did so with error handling on -EEXIST from backlight_device_register(). Unfortunately, that triggered a warning in dmesg all the way down from sysfs_add_file_mode_ns() and sysfs_warn_dup(). Instead of optimistically always attempting to register with the default name ("intel_backlight", which we have to retain for backward compatibility), check if a backlight device with the name exists first, and, if so, use the card and connector based name. v2: reworked on top of the patch commit 20f85ef ("drm/i915/backlight: use unique backlight device names") v3: fixed the ref count leak(Jani N) Fixes: 20f85ef ("drm/i915/backlight: use unique backlight device names") Signed-off-by: Arun R Murthy <arun.r.murthy@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220808035750.3111046-1-arun.r.murthy@intel.com (cherry picked from commit 4234ea3) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Pps power hook seems to be problematic for backlight controlled via aux channel. Disable it for such cases. Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/3657 Cc: stable@vger.kernel.org Signed-off-by: Jouni Högander <jouni.hogander@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220822140836.534432-1-jouni.hogander@intel.com (cherry picked from commit 869e3bb) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Asus chromebook CX550 crashes during boot on v5.17-rc1 kernel. The root cause is null pointer defeference of bi_next in tgl_get_bw_info() in drivers/gpu/drm/i915/display/intel_bw.c. BUG: kernel NULL pointer dereference, address: 000000000000002e PGD 0 P4D 0 Oops: 0002 [#1] PREEMPT SMP NOPTI CPU: 0 PID: 1 Comm: swapper/0 Tainted: G U 5.17.0-rc1 Hardware name: Google Delbin/Delbin, BIOS Google_Delbin.13672.156.3 05/14/2021 RIP: 0010:tgl_get_bw_info+0x2de/0x510 ... [ 2.554467] Call Trace: [ 2.554467] <TASK> [ 2.554467] intel_bw_init_hw+0x14a/0x434 [ 2.554467] ? _printk+0x59/0x73 [ 2.554467] ? _dev_err+0x77/0x91 [ 2.554467] i915_driver_hw_probe+0x329/0x33e [ 2.554467] i915_driver_probe+0x4c8/0x638 [ 2.554467] i915_pci_probe+0xf8/0x14e [ 2.554467] ? _raw_spin_unlock_irqrestore+0x12/0x2c [ 2.554467] pci_device_probe+0xaa/0x142 [ 2.554467] really_probe+0x13f/0x2f4 [ 2.554467] __driver_probe_device+0x9e/0xd3 [ 2.554467] driver_probe_device+0x24/0x7c [ 2.554467] __driver_attach+0xba/0xcf [ 2.554467] ? driver_attach+0x1f/0x1f [ 2.554467] bus_for_each_dev+0x8c/0xc0 [ 2.554467] bus_add_driver+0x11b/0x1f7 [ 2.554467] driver_register+0x60/0xea [ 2.554467] ? mipi_dsi_bus_init+0x16/0x16 [ 2.554467] i915_init+0x2c/0xb9 [ 2.554467] ? mipi_dsi_bus_init+0x16/0x16 [ 2.554467] do_one_initcall+0x12e/0x2b3 [ 2.554467] do_initcall_level+0xd6/0xf3 [ 2.554467] do_initcalls+0x4e/0x79 [ 2.554467] kernel_init_freeable+0xed/0x14d [ 2.554467] ? rest_init+0xc1/0xc1 [ 2.554467] kernel_init+0x1a/0x120 [ 2.554467] ret_from_fork+0x1f/0x30 [ 2.554467] </TASK> ... Kernel panic - not syncing: Fatal exception Fixes: c64a9a7 ("drm/i915: Update memory bandwidth formulae") Signed-off-by: Łukasz Bartosik <lb@semihalf.com> Reviewed-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220201153354.11971-1-lukasz.bartosik@semihalf.com (cherry picked from commit c247cd0) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Let the 'fixup_controls' card method return error values which will roll back the half-done binding of the card. Signed-off-by: Martin Povišer <povik+lin@cutebit.org>

If a reset domain is attached to the device, obtain a shared reference to it and deassert it. Typically on a chip the ADMAC controller will share a reset domain with the MCA peripheral. Signed-off-by: Martin Povišer <povik+lin@cutebit.org>